| |
|
|
| |
 |
|
| |
|
|
| |
Manufacturing
Process
Technicare has a a complete
manufacturing unit based on latest
technology and equipment being operated
by the skilled technicians. |
|
| |
Cold
Forging |
|
| |
 |
|
| |
At
Technicare Trained and highly
experienced operators, calibrated dyes
and latest machinery enable us to
produce instruments within required
precision limit, which is further
assured by Quality Assurance Inspection
to ensure the quality according to the
international quality standards. |
|
| |
Hot Forging |
|
| |
 |
|
| |
This critical process
is carried out on red-hot steel cuttings, which are hammered by a Hot
Forging Hammer (50-300tons). Process is executed by Highly skilled
personnel under strict process control conditions. After Trimming,
Straightening and Quality Assurance Inspection, the instruments are sent
to "Milling and Filing departments" for further run. |
|
| |
Milling
& Grinding |
|
| |
 |
|
| |
At
Technicare transformation of Skills and
Experiences of the forefathers regarding
milling of instruments
transcend us to produce The Piece of
Art. After being milled, the well
refined milling becomes the ultimate
process to beautify the instruments of
course with the involvement of latest
machinery and expertise manpower. |
|
| |
Filing
& Sizing |
|
| |
 |
|
| |
At Technicare
transformation of Skills and Experiences of the forefathers regarding
Filing Shaping and sizing the instruments transcend us to produce The Piece
of Art. During filing process each instrument is shaped in its actual
feature and size, it becomes the
ultimate process to beautify the instruments of course with the
involvement of latest machinery and expertise manpower. After completion
of filing process, instruments are heat treated to get the required
level of hardness. |
|
| |
Grinding & Polishing |
|
| |
 |
|
| |
Different kind of Belts and
Grinding Wheels are used to get the desired results of Product's
Outlook. Scissors and all other Cutting Instruments also undergo
the Edge Grinding Process. Samples, work instructions and
workmanship criteria are the vital tools to incorporate the
truth worthy customers' entire requirements in this process.
|
|
| |
Final
Buffing & Brushing |
|
| |
 |
|
| |
After the completion of polishing process
a final process of rebuffing and re brushing is carried out for each
single piece to give the instrument a better look as per customer's
valued instructions. |
|
| |
Ultra
Sonic Cleaning |
|
| |
 |
|
| |
Imported
(high tech) machinery, trained operators
and process of validation are used in
the instrument cleaning process to get
the required results of cleanliness. |
|
| |
Setting
& Quality Control Inspection |
|
| |
 |
|
| |
Each and
every instrument is checked in its
smooth movement, functional and
polishing requirement by the Quality
Controllers. Our experience of past
training, quality planning and strict
quality control gives us the required
level of Valued Customer's Satisfaction.
After Quality Control Inspection the
instruments are then rebuffed for ultra
better results. |
|
| |
Stamping |
|
| |
 |
|
| |
After the
completion of final inspection every
instrument is stamped as per customer's
instructions. |
|
| |
Packing &
Dispatching |
|
| |
 |
|
| |
Product
friendly environmental conditions in the
packing area, calibrated tools, testing
instructions, highly experienced and
trained quality assurance inspectors
carryout this process for final
inspection in order to ensure the entire
conformance to Customers' satisfaction.
Each and every instrument is then judged
by these inspectors with an eye of
Internal Customer. Packaging is always
done as per Customer's instructions.
|
|
| |
Research &
Development |
|
| |
    |
|
| |
We have a
research and development centre where we
have latest machinery which is
being operated by high qualified
technicians who help us to maintain high
quality standards.
TECHNICARE, is also
involved in design and development of
new and custom-made Beauty care
instruments, Hair styling scissors, and
many more. |
|
| |
|
|
| |
|
|
| |
|
|
